This unique modular design allows for easy field installation and service. No straight run of pipe is required before or after the monitor, minimizing pressure drop and the installation footprint. Vane-style flow meters have a spring-opposed vane that moves in relation to the flow rate. The fluid forces the vane to move through a contoured opening creating a variable orifice; the greater the flow the larger the orifice becomes for flow to pass. The vane style monitor is spring loaded and allows the vane to return on decreasing flows.
Maximum Flow Rates
3 inches | 0 – 1500 l/min |
4 inches | 0 – 2000 l/min |
6 inches | 0 – 3500 l/min |
8 inches | 0 – 5000 l/min |
Maximum Pressure
Low pressure up to 300psi (20 Bar) |
Medium pressure up to 725psi (50 Bar) |
High pressure up to 300psi (200 Bar)* |
Cast iron, steel & stainless steel only. |
Features
- +/- 3% accuracy across full range
- Calibrated in any unit of measure
- Single or dual scale options
- Individually calibrated.
- Simple modular design
- Low pressure drop.
- Viscosities up to 600cSt
- Installed in any position.
- 1% rate of repeatability switch set point – accurate & reliable.
- Weatherproof enclosure box
- Capable of twice the maximum indicated flow
- Available in a wide range of materials
Applications
- Water
- De-Ionised Water
- Soluble Oils (Glycols)
- Petroleum Based Fluids
- Synthetic Based Fluids
- Coolants
- Corrosive Fluids
- Paints
- Solvents
- Air and Gases
