EASZ-10P Handheld Doppler Flow Meter
The EESIFLO EASZ-10P is a handheld non-invasive microprocessor-based meter for measuring the flow rate and total volume of liquids flowing through process and effluent pipelines. It is suitable for a wide range of liquids, including aerated water, liquids containing suspended solids, slurries, and sludges. The EESIFLO EASZ-10P requires fluids with a minimum concentration of 100 ppm of solids or bubbles having minimum size of 100 microns and works on most pipes 2 inches and above.
FEATURES
- Microprocessor controlled.
- Programmable
- Easy to use.
- Flow total and rate display.
The flowmeter utilizes the non-intrusive Doppler principle to measure the mean velocity and is particularly useful as a temporary flow indicator or as a working tool to establish flow conditions in field or plant installations. Units of me Handheld Device is easily transported measurement available are m/s, ls, lm, lh, m3/sec, m3/ m, m3/hr, ft3/h, ft3/s, usgps, usgpm, usgph, usmgd.
APPLICATIONS
- Slurries
- Dredging
- Pulps
- Primary sludge
- Digested sludge
- Thickened sludge
- Waste activated sludge.
- Return activated sludge.
SPECIFICATIONS
Velocity Range: 0.98 f/s to 32.81 f/s
Accuracy: Better than ±2% of FS
Repeatability: ±1%
Cable Length: 6.5ft
Power: 4 x AA cells Incl.
Temperature: Sensor -4F to 194F
Battery Charger: 230 Vac or 110 Vac 50/60 Hz incl.
Transducer: IP68 St/Steel
3.19″ x 0.91″ x 0.91″
Epoxy-faced
Electronics: -14F to 122F
Indication: 2 – Line 16 Character, Backlit LCD
Electronics: Black Moulded ABS
Enclosure: 7.72″ x 3.94″ x 1.57″
Weight: 1.87 lb
